|
|
|
|
|
 |
Bearing Steel Wires |
 |
The wires are used for making balls, Needle Rollers, Taper Rollers & Cylindrical Rollers for Bearings. These are also used for making Travel Wires for textile machinery. We are manufacturer of ball bearing wires, bearing wires, balls, needle rollers etc. All Properties like hardenss, tensile strength, size tolerance, coil wt. etc are maintained as per customers specifications. Size range : 0.50-25.00 mm |
| Technical Info |
| Grade | % C | Si | Mn | S | P | Cr | ||||||
| SAE 52100/ EN31/100CR6 | 0.95 | 0.20 | 0.25 | 0.025 max | 0.025 max | 1.3 | ||||||
| -1.10 | -0.35 | -0.45 | NA | NA | 1.6 | |||||||
|
The wire is spherodised annealed that is uniformly
distributed fine carbon, globules in ferrite matrix. |
Needle Wires |
|
These wires are produced from high carbon grades of steel. The end user of wires is in needles for sewing and hosiery purposes. |
 |
| Technical Info |
| Grade | C | SI | Mn | S | P | UTS | ||||||
| High Carbon | 0.75 - 0.85 |
0.10 - 0.35 |
0.50 - 0.90 |
0.05 - max |
0.05 - max |
58 -72kg/mm sq. | ||||||
| Wire Size |
| Tolerance | Coil Id | Coil wt | ||
| Min | 0.6 |  0.01 |
250 mm | 6 to 25 kg |
| Max | 2.00 | 0.02 |
450 mm | 10 to 40 kg |
|
The above wires can also be
supplied in other grades like 52100 or EN 31, as per customer's
specifications. |
CHQ Wires |
 |
Our wires are very well suited for cold heading processes not only for their high ductility, but also for their attitude to the tempring process. Further treatments of the wire rod e.g. spherodized annealing, chemical pickling and phosphate and soap coating are carried out internally. |
| Technical Info |
| Wire for high tensile fastners | SAE 4140, SAE 1541, 10B21, 15B25 |
| Low carbon wire for Rivets, Screw, Nuts etc | C-1008, C-1010 |
| Medium carbon wire for fastners | EN-8D |
Nipple Wires |
|
These wires are produced from EN(IA)Pb/SMnPb30/12L14 grades and are used for making nipples for cycle & motorcycle spokes. |
 |
| Chemical
Composition These wire are produced from EN (IA)Pb grade & are used for making nipples for cycle & two wheelers |
|||||
| %C | Mn | Si | P | S | Pb |
| 0.07 - 0.15 | 0.10 - max | 0.8 - 1.10 | 0.07 - max | 0.20 - 0.30 | 0.2 - 0.3 |
